2-axis digital remote head
weight 40 lbs ( 18 kg )
payload 44 lbs ( 20 kg )
The MagicHead is a 2-axis digital non-stabilized remote head developed by Moviebird. Each axis has a unique dual motor drive system which eliminates any backlash or play
in the drive gears and gives the head a very smooth change in direction. The digital electronics constantly monitor the heads position eliminating any drift and making the head very accurate, even after long periods of continuous use. The Magic head has a control desk for easy access to dampening and speed adjustments on all axes, it has wheel controls but also a joystick, focus and zoom controls for broadcast events where the Operator can take full control of the camera.
Maximum Load : 44 lbs / 20 Kg
Own weight : 40 lbs / 18 Kg
Dimensions : 7” x 22” x 27.5” / 180 mm x 560 mm x 700 mm
Clearance for TILT axis of the camera : max. 21.25” / 540 mm
Maximum speed : 1/4rev/s (90⁰), (360⁰/4sec.) for all axes.
Adjusting/balance o the camera for both axes.
Cable connecting head with desktop : 164’ / 50 m.
FOCUS/ZOOM cables for CANON and FUJINON lenses.
Stabilized power supply.
Transport case: 29.5” x 31.5” x 23.6” / 750x800x600
Total weight of the transport set: 159 lbs / 72kg
The control desktop/panel contains :
The standard length of the cable used to connect the desktop with the head is 164 feet (50m) . This can be extended up to 492 feet (150m).
Separate adjustment of SPEED and FLUID soft start/end for both axes, switches for changes in directions DIR and also LOCK buttons for PAN and TILT axes.
HOME button – returns head to ‘power up’ position.
FOCUS rotate regulator and ZOOM tilt for TV cameras.
Adjustment of LIMIT HI and LIMIT LOW range for FOCUS function, switch of working direction DIR and FLUID regulator.
ZOOM speed adjustment, button of maximum SPEED MAX and switch of working direction DIR.